Home/Cooling System Parts/Mazda Bongo Coolant/Heater Pipe Set

Mazda Bongo Coolant/Heater Pipe Set

£400.79 inc VAT

This is the entire set of coolant and heater pipes.
Frequently brought alongside CO0074.

SKU: CO0077 Category:

Description

SUITABLE FOR:
2.5 Turbo Diesel-(WL-T)-Chassis(SGL3,SGL3F,SGL5,SGL5F,SGLW)
2.0 Litre Petrol-(FE)-Chassis(SGEW,SG3E)
2.5 Litre V6 Petrol-(J5)-Chassis(SG5W)

SOURCE:
Genuine Mazda Parts.

WARRANTY:
12 month failure warranty, subject to installation in line with manufacturer’s guidelines.
** Please note there is a 20% re-stocking fee, should you wish to return this item **

DESCRIPTION:

Mazda Bongo Rear Heater Matrix Short Metal Pipe – All Models – 1995 onwards – CO0061
This metal pipe runs across the vehicle above the gearbox, linking the flow and return of the front and rear heater systems. It is located next to the air conditioning metal pipes that feed the rear A/C unit. At one end it is connected to the passenger side long metal heater flow & return pipe, the other end connects to the rear heater. Both connections are via hoses.

Mazda Bongo Large Bore Metal Water Pipe O/S (Drivers) – All Models – 1995 onwards – CO0065
This Genuine Mazda metal coolant pipe joins the top engine hose to the top radiator hose. It is located under the drivers side of the car, and has a small T branch near the rear end, this has a rubber blanking sleeve on it. This small T branch can be used to help drain the coolant system as it is at a very low level of the whole coolant system.

Large Bore Metal Water Pipe N/S (Passenger) – All Models – 1995 onwards – CO0064
This Genuine Mazda metal coolant pipe joins the thermostat engine hose to the bottom radiator hose. It is located under the passenger side of the car.

Mazda Bongo Rear Heater Long Metal Pipe- O/S – All Models – 1995 onwards – CO0063
This pipe connects the front heater matrix to the rear heater matrix, and is part of the heater flow & return circuit. It also has a T branch at the rear end which connects to a hose going up to the drivers side of the engine. It is located on the drivers side of the vehicle running along the chassis rail.

Mazda Bongo Rear Heater Long Metal Pipe – N/S- All Models – 1995 onwards – CO0062
This pipe connects the front heater matrix to the rear heater matrix, and is part of the heater flow & return circuit. It has a T branch in the middle under the passenger seat, and a small branch by the front heater which has a small hose going to the header tank. It runs along the passenger side chassis.

Additional information

Weight 0.1 kg
Car Model

2.5 V6 Litre Petrol

Title

Go to Top