Mazda Bongo Cylinder Head – Full Kit – Brand New – 2.5TD – 1995 onwards

£673.75 inc VAT

Our cylinder heads are completely built up with the valves pre-set. They are brand new and come with the whole head gasket set, water elbow and timing belt.

We would also recommend replacing both sets of copper washers. If you are looking to do a complete re-vamp, we can recommend the full hose set, water pump, thermostat, 1 pin temp sensor, 2 pin temp sensor, metal coolant pipes, radiator, filter set, glow plugs (short or long), header tank.

** All fitting instructions must be carefully followed – download them here **

** You can find them in your parcel, attached to the box and on email **
** In the event of an issue, please contact us in the first instance, DO NOT remove the head **
** If the head has been removed prior to calling us, your warranty may be invalid **

SKU: EN0018 Category:

Description

PRODUCT:
Mazda Bongo Friendee & Ford Freda NEW built Cylinder Head Kit

SUITABLE FOR:
2.5 Turbo Diesel WL-T, 12 valve.

WHY IS THIS THE BEST WE OFFER?
The new cylinder heads we supply are a top quality product and we have fitted many of them with no problems. Each head is hand assembled in the UK for each individual order. A high quality new complete cylinder head is used, then checked over by our own engine builders & set up, lubricated and made ready to fit as soon as it comes out of the box. The valve clearances are set and each head inspected before it is dispatched. These are all jobs you would need to do yourself before you fit the standard head. This will save you time. If you really want to fit a top quality product, this should be your preferred choice.

Supplied complete with Full Engine Gasket Kit including: Head Gasket, Exhaust Manifold Gasket, Inlet Gasket, Rocker Gasket, Camshaft Seal, Valve Stem Oil Seals, Rocker Bolt Seals, Turbo Gaskets and more. Full set of Head Bolts and Timing Belt.

NOTE: You must check all valve clearances again once the head is in place & has been correctly torqued down.

You will receive:
1 x New Hand Built Cylinder Head
1 x Head Gasket Kit
1 x Set of Head Bolts
1 x Timing Belt
1 x 3 Way Water Elbow
1 x set of 4 Crush Washers

VALVE CLEARANCES:
Inlet 0.1 or- 0.05mm (cold)
Exhaust 0.2 or- 0.05mm (cold)

You will need to check the valve clearances once the head is fitted.

SOURCE:
Manufactured to OE standard.

WARRANTY:
Supplied with 12 month warranty, subject to installation in line with manufacturer’s guidelines.
** Please note there is a 20% re-stocking fee on this item, should you wish to return it **

NOTE:
You may also need to purchase the copper washers which are all sold separately: injector copper washer No1 and? injector copper washer No2

 

Additional information

Weight 25 kg
Car Model

2.5 Turbo Diesel, Kits

Go to Top